PROVIDING RELIABLE RADIO CONTACT TO RACING TEAMS WORLDWIDE

INCAR WIRING HARNESS

The incar wiring harness is the heart of your radio system. It is exposed to a very hostile and noisy environment in a race car (ignition and all electronics )

The Racing Radios USA quality Radio harnesses were developped since the 1980’s
are manufactured in the US and they meet the highiest standards in the industry.
You can find those in race cars all over north america and abroad in all types of racing.
Do not settle for less.

PTT SWITCHES

Push to talk switches are basically all the same. They just come in different shapes.

1- The Velcro type wraps around the steering wheel or any other nearby objects ( roll bars / Shifter )
for appropriate positionning in the cokpit.

2- The heavy duty hole mount PTT switch are mounted on steering wheels
and requires a good tumb pressure to activate.

3- The miniature Hole mount PTT switch is also mounted on steering wheels , have a lower profile design and requires only a small tumb pressure to activate.

RACE CAR ANTENNAS

The primary role of an antenna is to transform electrical energy into electromagnetic field with minimum loss.

The cheapest antenna is the very popular 1/4 wave rod (unity gain) tuned to 450-470 Mhz.

On next level is the ELITE 3Db gain antenna wich increases the overall range of a radio system.

The best on the market is the CAK-70 antenna with it’s built-in ground plane.
this one is used by most pro racing teams all over north America.

Remember a good and reliable feed line (coax cable ) is critical to carry the signal from the radio to the antenna and that a bad radio antenna can anhihilate your entire radio system performances if improperly installed and tuned.

ANTENNA RF ADAPTORS

INCAR RADIO ACCESSORIES

INTERCOM

GET IN TOUCH WITH THE RACING COMMUNICATIONS SPECIALIST